Home Page
| DCC Page
Digitrax Zephyr:
Digitrax
Empire Builder:
Digitrax Super Chief:
Digitrax Zephyr Starter Set:
Zephyr is perfect for beginning,
intermediate and advanced model railroaders. It is easy to use and
has tons of features. Zephyr offers excellent speed control,
prototypical consisting, the full range of programming features and
much more.
Zephyr Offers:
- Simple to use controls for
running trains.
- Large speed control knob and
direction switch with brake.
- Full numeric key pad.
- Easy 2 and 4 digit addressing.
- Smooth speed control.
Run multiple trains
at once without blocking!
- Run up to 10 addresses at the
same time on your system.
- Run up to 10 throttles at the
same time on your system.
Jump Ports for using DC power packs as
additional throttles:
- Use one or two smooth DC power
packs as throttles to control DCC equipped locomotives.
- Simple, cost effective way to
add more throttles to your Zephyr set.
- Makes it easy to share the fun
of DCC with layout visitors and young operators.
- Functions on locos controlled
by Jump throttles remain active.
Over 9000 Locomotive
Addresses:
- Use Address 00 to run one or
more locos without DCC decoders
- Two Digit Addressing is easy
to use. (Address 01-127)
- Four Digit Addressing-use the
number painted on your engines as its address.
2.5 Amps of Power to run
multiple trains:
- Booster outputs 12V for safe
operation in N and HO scales.
Function Control:
- Control 10 functions-F0
through F8.
- Function 2 is a special
non-latching key that can be used to sound the horn for as long
as the key is held down.
- Constant brightness lighting.
Headlights can be directional or independently controlled
(depending on decoder).
Stationary Decoders,
Turnout Control & Turnout Position Reporting:
- Access to stationary decoder
control for turnouts and other devices.
- Control 999 stationary decoder
addresses.
Consisting:
- Universal consisting, Digitrax
preferred method. ALL locos can be consisted, even analog locos.
- Advanced consisting, allows
only advanced consist capable mobile decoders.
- Basic consisting, program
decoders to run on same address.
Decoder Programming:
- Built in read/write programmer
that can read and write all CVs.
- Supports Paged programming
(Digitrax preferred method). Also supports direct & register
mode programming.
- Operations mode programming
can be used to program decoders on the layout.
Expandability with
Digitrax LocoNet:
- Use Zephyr as a starting point
for your Digitrax LocoNet System, then add components.
- Use Zephyr as an expansion set
with Digitrax equipment you already have installed.
- Add Radio or IR via LocoNet.
Just plug in a UR90 or UR91 receiver and add IR and/or Radio
throttles.
Digitrax Empire Builder:
Super Empire Builder is perfect for
most home and club layouts. It offers excellent speed control,
prototypical consisting, the full range of programming features and
much more. A Super Empire builder Advanced Starter Set is
available and come IR radio equipped.
DT400 Super Throttle &
DB150 Command Station Offers:
- User interface makes DCC
simple.
- Dual throttle controls.
- Full numeric key pad.
- Simplified 4 digit addressing.
- Easy address browsing and
selection.
- User friendly text messages to
guide you.
- Click encoders for smooth
speed control.
- Multi-line LCD display puts
all the information you need right at your fingertips.
- Infra-ready out of the box.
Radio equipped version also available.
- Ready for transponding and cab
signalling.
Plenty of Capacity for Most
Layouts:
- Run up to 22 addresses at the
same time on your system.
- Run up to 22 throttles at the
same time on your system.
Over 9000 Locomotive Addresses:
- Address 00 for operation of
one or more locos without decoders
- Two Digit Addressing is easy
to use. (Address 01-127)
- Four Digit Addressing-use the
road number of your engines as their addresses. (Address
0128-9000+).
5 Amps of Power to run more
trains:
- Selectable scale voltage for
safe operation in ALL scales.
Function Control:
- Control 13 functions-F0
through F12.
- Function 2 is a special
non-latching key that can be used to sound the horn for as long
as the key is held down.
- Constant brightness lighting.
Headlights can be directional or independently controlled
(depending on decoder).
Decoder Programming:
- Built in programmer that can
write all CVs.
- Supports Paged programming
(Digitrax preferred method). Also supports direct & register
mode programming.
- Operations mode programming
can be used to program decoders on the layout.
Stationary Decoders,
Turnout Control & Turnout Position Reporting:
- Access to stationary decoder
control for turnouts and other devices.
- DT400 reports turnout position
based on last command sent.
- Control 999 stationary decoder
addresses.
Consisting:
- Universal consisting, Digitrax
preferred method. ALL locos can be consisted, even analog locos.
- Advanced consisting, allows
only advanced consist capable mobile decoders.
- Basic consisting, program
decoders to run on same address.
UP5 Universal Panel:
- Makes LocoNet hook up simple!
- 2 LocoNet jacks for hooking up
your LocoNet network.
- 3 throttle jacks for hooking
up throttles and other non-RailSync devices.
- Included with non-radio sets.
Radio equipped sets include UR91 radio receiver.
Digitrax Super Chief:
The Super Chief Starter Set is
designed for the model railroader who wants all the latest features
available in command control today. Super Chief can run up to
120 locos & throttles at the same time. The Super Chief
Premium Starter Set comes IR radio equipped.
DT400 Super Throttle and
DCS100 Command Station Offers:
- User interface makes DCC
simple.
- Dual throttle controls.
- Full numeric key pad.
- Simplified 4 digit addressing.
- Easy address browsing and
selection.
- User friendly text messages to
guide you.
- Click encoders for smooth
speed control.
- Multi-line LCD display puts
all information at your fingertips.
- Infra-ready out of the box.
Radio version available.
- Ready for transponding and cab
signalling.
Big System Capacity for Big
Layouts:
- Run up to 120 addresses at the
same time on your system.
- Run up to 120 throttles at the
same time on your system.
Over 9000 Locomotive
Addresses:
- Address 00 for operation of
one or more locos without decoders
- Two Digit Addressing is easy
to use. (Address 01-127)
- Four Digit Addressing lets you
use the road number of your engines as their addresses. (Address
0128-9000+)
5 Amps of Power to Run More
Trains:
- Selectable Scale Voltage for
Safe Operation in ALL Scales
- 8 Amp Version Also Available
Function Control:
- Control 14 functions-F0
through F12.
- Function 2 is a special
non-latching key that can be used to sound the horn for as long
as the key is held down.
- Constant brightness lighting.
Headlights can be directional or independently controlled
(depending on decoder capabilities).
Two DCC Outputs:
- Use one output for programming
decoders while the other runs the layout. No need to shut down
the layout to program decoders!
- Use one output for a braking
section while the other runs the layout.
Decoder Programming:
- Built in read/write programmer
lets you program and read back CV values.
- Supports Paged programming
(Digitrax preferred method). Also supports direct and register
mode programming.
Consisting:
- Universal consisting, Digitrax
preferred method. Allows ALL locos to be consisted
prototypically, even analog locos.
- Advanced consisting and Basic
consisting, too!
- Nested consisting where
consists can be consisted together.
Stationary Decoders,
Turnout Control & Turnout Position Reporting:
- Access to stationary decoder
control for turnouts and other devices.
- DT400 reports turnout position
based on last command sent.
- Control 999 stationary decoder
addresses.
Routes:
- Turnout List/Route capability
to simplify complex yard operations.
Customizable System
Options:
- User adjustable voltage trim.
- Turn audible warnings on or
off.
- Set up purging options.
- Multi-format command station
mode (Motorola Trinary Format).
For additional information,
please go to the manufacturers web site at
www.digitrax.com